Alumina Ceramic Foam Filter
Product No: TPU®-AL-CFF
Alumina Ceramic Foam Filters are mainly applied for filtration of aluminum and aluminum alloys in foundries and cast houses . With their excellent resistance to attack and corrosion from molten aluminum, they can effectively remove inclusions, reduce trapped gas and provide laminar flow, and then the filtered metal is significantly cleaner. Cleaner metal results in higher-quality castings, less scrap, and fewer inclusion defects, all of which contribute to bottom-line profit.
Alumina ceramic foam filter can be made by specific procedures and have peculiar bone-frame holes just like the shape of foam(Called three-dimensional connected channel) and myriad eyelets which only been found in big times microscope. Compare to similar ones, our products have many advantages as below:
v
Stable chemical composition
v
Excellent strength
v
Resistant to high temperature
v
Calm down of the turbulent flow of metal nicely
v
big m2/m3
v
Superior dimensional tolerances: +0/-2.5
Standard
size: (we can also customize the size according to your
requirement)
§
178x178x50 mm or 7'' x7''x2'' (10--60ppi)
§
229x229x50 mm or 9'' x9'' x2'' (10--60ppi)
§
305x305x50 mm or 12'' x12'' x2'' (10--60ppi)
§
381x381x50 mm or 15'' x15'' x2'' (10--60ppi)
§
432x432x50 mm or 17'' x17'' x2'' (10--60ppi)
§
508x508x50 mm or 20'' x20'' x2'' (10--60ppi)
§
584x584x50 mm or 23'' x23'' x2'' (10--60ppi)
More information
Alumina Ceramic Foam Filter has the advantages of high porosity, low loss of thermal shock, high mechanical strength at normal and high temperature, large specific surface, good chemical stability and excellent filtering functions of screen, filtering residuum collection and adsorption especially for tiny impurity of 1~10μm.
The three-dimensional structure can improve the cast quality in
large scale by changing the molten metal from turbulence flow to
lamellar flow, removing the gas and smoothing the casting. Ceramic
foam filter is not only applied for molten metal filtering in high
temperature, but gas treatment in high temperature, carrier of
catalyzer, solid heat exchange and advanced filling for chemical
industry.
Physical Properties:
Working Temperature |
≤1200°C |
Porosity |
80~90% |
Compression Strength (Room Temperature) |
≥1.0Mpa |
Volume Density |
≤0.5g/cm3 |
Thermal Shock Resistance |
800°C---room temperature 5 times |
Application |
non-ferrous and alumina alloys, high temperature gas filter, chemical fillings and catalysis carrier etc. |
Chemical Composition:
Al2O3 |
SiC |
SiO2 |
ZrO2 |
Others |
80~82% |
--- |
5~6% |
--- |
12~15% |
Application of Ceramic Foam Filter: